Thank you for a great idea. I feel better already. Jim McCormac Fallbrook, California A440A@aol.com wrote: > > GREETINGS, > Dave writes; > > >> You don't > need to file anything. If the strut were that tight it wouldn't buzz. > > It is also possible that the screw has bottomed out in the hole before > it pulled the strut all the way down. Perhaps putting a small washer under > the screw before you remove the strut will make the difference you are > looking for. That is easier than grinding anything, and it is reversable. > > Regards, > Ed Foote > Precision Piano Works > Nashville, Tn.
This PTG archive page provided courtesy of Moy Piano Service, LLC