Hi Ave Dude, >From: ATodd@UH.EDU (Avery Todd) >Subject: Rattles & squeaks > > I need a little advice on a good way to get rid of a rattle coming from >the lock mechanism in the stretcher bar of a new Kawai GS-70 Factory suggests .......... fill key cavity with cotton balls until rattle quits. I've done this and have had success. That's how I remembered it being. Somewhere along the line I had to remove the plunger to do this. Press the plunger down, and look for the phillips screw under the stretcher on the plunger. Unscrew and remove assembly. Add cotton in the now vacant plunger cavity maybe?? Then reassemble. Sorry for all the clouds and fog, it's that time of year around here. Huckleberry Liquour is about ready, another month and I'll be tasting it to see if it's up to standards. Chantrelles were rather abundant this year, we're having them in everything lately. Lar Larry Fisher RPT specialist in players, retrofits, and other complicated stuff phone 360-256-2999 or email larryf@pacifier.com http://www.pacifier.com/~larryf/ (revised 10/96)
This PTG archive page provided courtesy of Moy Piano Service, LLC