Bo> full damper pedal (right) is operated, the bass dampers lift late and Bo> in a bow-shaped pattern. The first and last dampers of the bass Bo> section lift with the treble dampers, with the dampers in between Bo> lifting afterwards. The bass lifter rod is straight, as are the Bo> hanger hooks. I'ver tried varying thicknesses of replacement leather Bo> between the rods, which only change the timing of the lift, not the Bo> pattern. Any ideas? Patrick Poulson, RPT The bass damper lifter rod may have a weak,(cracked), hanger in the center. Does it have three hangers? Scott Johnson Auburn, California scott.e.johnson@24stex.com ___ Blue Wave/DOS v2.21 [NR]
This PTG archive page provided courtesy of Moy Piano Service, LLC