Too much sustain

[Keith A. McGavern]

>...Already tried muting the duplex areas without making a
>difference.  Building in extra dampers seems ludicrous. Voicing down
>the area will cause loss of clarity and change the eveness of the
>section, so that is not a good option. Any ideas?

Couple of ideas:
Try muting the section between the tuning pins and the capo bar.  Also, you
might reposition the strike point on the offending hammers ever so
slightly.

Keith A. McGavern, RPT
kam544@ionet.net
Oklahoma Chapter 731
Oklahoma Baptist University
Shawnee, Oklahoma, USA