mortised in pin block was Re: 1914 WEBER PINBLOCK "Re: mortised in pin block was Re: 1914 WEBER PINBLOCK" (Sep 13, 11:55pm)

Newton Hunt nhunt@rci.rutgers.edu
Sat, 14 Sep 1996 10:08:47 -0400


I would consider replicating the original design unless doing so would also
replicate the problem as well.  I would then consider delignit for its
demential stability.

I do have a preference for the extra two letters on the end of my name.

	Newton
	nhunt@rci.rutgers.edu




This PTG archive page provided courtesy of Moy Piano Service, LLC