>Get your parts from Brooks, Ltd. They have all the parts, not just some. >The cost is very high, but having worked with the parts, they are >beautifully made and work well. > >Keep the damper blocks, they have been drilled for that piano and >replacement blocks are far more trouble than they are worth, unless you go >to the berral and block system. The over dampers can be remade out of coat >hanger wire, if you must. I would suggest trichords instead. > >Be carefull, the dampers must be set up to match the original because there >is very little room for variation for adjusting damper timing and spoons. > >Mine has about six overdampers and since they are there I will use them with >new felts all around. > >The cost of the parts is very high, but what in Steinways is not? > >Have a nice week. > > Newton > nhunt@jagat.com > >
This PTG archive page provided courtesy of Moy Piano Service, LLC