A drop of glue will do...the stiff plastic is knocking on the wire where it comes thru the hole...answer is to plug the hole...good luck....Dick RPT ---------- > From: Dianne Salem <dsalem@pop1.fullerton.edu> > To: Pianotech@byu.edu > Subject: Baldwin/Hamilton bridle straps > Date: Tuesday, April 22, 1997 6:49 PM > > Thanks to those of you responded to my question about clicking on between > the bridle straps and the bridle strap wires. This is not a case where the > wires are hitting anything -- it is isolated between the wire and the end > of the strap -- just wondered if anybody had any solutions besides > replacing all the straps / this happened to me in a performance situation > this week. I loosened the ends of the straps off the wires, kind of > "roughed them up" a little on the end and put them back on the wires, but > not tightly. This seemed to work / had to do a couple of times on some to > completely elmiinate clicking. > Thanks again > Dianne > >
This PTG archive page provided courtesy of Moy Piano Service, LLC