Dear list, Just found a neat product called "Strip-Tac". It's a blank 81/2 X 11 sheet with a peel - away adhesive back used for making label in your printer. The neat thing is it has perforations on the back so you can cut your flange shimming papers that end up with a little break in the middle of the backing paper. When you bend the shim in the middle the backing paper pops open and peels away like the backing on a Band - Aid. Just stick on the flange and go. Also it comes off easily if needed. No more dropping shims down into the action. Merry Christmas to all from the snow belt! Bob Sadowski Erie, PA.
This PTG archive page provided courtesy of Moy Piano Service, LLC