robert moffatt piano service wrote: > Thanks for the input! If you are correct in that it is the quality of > the glue joints on the ribs that makes the difference, then your final > paragraph affirms Hal's observation. That is, the Wurlitzer's inability > to hold a tuning is due to a failure of the soundboard's construction. > > I've not read anything on the 'net about a follow up on this particular > problem. Any news? > > BTW, this is a fine addendum to my education. Keep the good stuff > coming! > > Scott Pickett ---------------------------------------- I should have included that it was the back assembly that was coming apart. The ribs were/are still intact. In any case, this would be a failure due to sloppy manufacture, not of design. There is a difference. -- ddf
This PTG archive page provided courtesy of Moy Piano Service, LLC