On Tue, 23 Dec 1997, DGPEAKE wrote: > To start with, find a hammer blow distance that will work. Most will work at > 1 3/4 " to 1 7/8" (American). Most key dip is around 2 1/2". If aftertouch > is a problem, try raising the hammer height a bit. Hi, Dave. It's real late at night and I'm fading fast, so maybe I'm reading this wrong, but did you perhaps mean a key heighth of around 2 1/2"? Wouldn't a key DIP of 2 1/2" translate to a hammer blow distance of over a foot! :) Season's Greetings and Best Wishes for the New Year to All! Les Smith lessmith@buffnet.net
This PTG archive page provided courtesy of Moy Piano Service, LLC