Ryan, Philip wrote: > > Dear Ed, > > How can one "plug their offset in BEFORE you put an FAC tuning into > memory" when one does not know the size of the offset until one has > calculated the FAC tuning? Must you calculate the FAC twice? > > Phil > Phil, the whole situation is adjustable at any time! If you don't like the offset, figure out how much it is off, 1. press SHIFT and tap TUNE to get a zero in the window, 2. enter your adjustment, then 3. roll it from SHIFT to MSR (press SHIFT then MSR, lift off SHIFT, then off MSR). 4. When your finger presses MSR, your new offset will show in the window. 5. When you're off the buttons, the window will be zero. 6. Now press SHIFT and tap NOTE (up or down) twice and you're back at the page number where you started, ready to tune again. -- Warren D. Fisher fish@communique.net Registered Piano Technician Piano Technicians Guild New Orleans Chapter 701
This PTG archive page provided courtesy of Moy Piano Service, LLC