Hammer felts separating from core

[Albert Lord]

As Les wrote:
>a temporary, band-aid approach, at best.
>The reason is that if half a dozen or so hammers have had their felt
>come unglued from the core, you can bet that the rest of the hammers
>are "thinking" about doing the same thing and, in time, will.

A preventive band-aid  for hammers with these miscreant thoughts is a bead
of medium
viscosity CA glue where the thin edge of the felt meets the moulding.  It
soaks in and seems to
keep them from popping loose.

Albert Lord.