Bonifield/Poulson wrote: > > List Members: I just finished (almost) working on one of those rare > beasts, a Wurlitzer grand with a metal pinblock. I say almost because > in the process of replacing a bass string, the tuning pin broke right > at the becket hole. Any ideas as to where to find a replacement for > the *&^% thing? Thanks, Patrick Poulson, RPT If this is the type pin that is flat on the end and about half the length of a regular pin. You just take a hacksaw to a regular pin and grind it flat afterwards on a bench grinder. I seem to remember a 2/0 worked. Hope this helps Warren -- Warren D. Fisher fish@communique.net Registered Piano Technician Piano Technicians Guild New Orleans Chapter 701
This PTG archive page provided courtesy of Moy Piano Service, LLC