> From: rmartin21@juno.com > To: pianotech@ptg.org > Subject: Susan, Sam and list > Date: Mon, 16 Jun 1997 19:02:02 EDT > Reply-to: pianotech@ptg.org I have to agree with Jon Page that it makes more sense to swab the hole with the varnish than dip the pin...I haven't used pin driving liquid but will the next restringing job! Thanks for the tips... David ilvedson, RPT Pacifica, CA > Incidentally, I don't know if you use the old varnish treatment or > not..but it sure eliminates jumping pins. I should mention the caveat: > When I dip the pin into the open can of varnish, it's only the very > bottom of the pin that has any varnish on it. If you dip the whole pin > you'll have some varnish on top of the bushing. It's really too much and > doesn't need that much to be effective anyway. >
This PTG archive page provided courtesy of Moy Piano Service, LLC