A spring perhaps? Damper tray return, underlever? Hmmm, a puzzlement. Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At 10:05 AM 3/15/97 -0800, you wrote: < I would not use the term rattle -- perhaps a metallic >buzz. Or metallic "shimmer". It reminded me very much of the sound a >cymbal with rivets makes as the cymbal reaches the end of its decay. I >also discovered when I bumped the pins in the high treble section with my >hammer that the same noise was produced. Or a light tap on the plate strut >next to the pin block would also make the same noise, so the noise isn't >caused by any of the tone producing parts of the piano. No coins, pens, >nails, hammers, or objects on the plate. Does know the cause and a >solution? > >Thanks. > >Don Price, RPT >dcp@sosinc.net > > Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC