"cracking" pins

[C. Mike Swendsen]

Try dipping the pin in varnish before driving it into the hole...that
works very well..
C. Mike Swendsen  RPT

robert sadowski wrote:
> 
> Dear list,
>      When restringing an old block, what do some of you use to get a
> smoother moving pin - to eliminate that "cracking" feel.  An old tuner told
> me to put some talc on the pin before driving it in.  Any other
> suggestions?
> 
> Thanks to all,
> 
> Bob Sadowski RPT
> Erie, PA