CA and tuning pin bushings

[Don]

Hi Pat et al,

All you really need is a thin (read like water) CA glue. 

At 04:01 AM 10/22/97 -0400, you wrote:
>Hi, 	
>I've noticed that a lot of the comments included the use of CA glue to help
>tighten the tuning pins. I've had great success with this treatment, but only
>on pinblocks that don't have tuning pin bushings. 
>Pat Wethington
>
>
Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.
"Tuner for the Centre of the Arts"
drose@dlcwest.com
3004 Grant Rd.
REGINA, SK
S4S 5G7
306-352-3620 or 1-888-29t-uner