---------- > From: JIMRPT <JIMRPT@aol.com> > To: A440A@aol.com; owner-pianotech@ptg.org; pianotech@ptg.org > Subject: Re: Re: String Levelling guestions > Date: Tuesday, April 07, 1998 2:09 PM > > > In a message dated 4/7/98 11:28:35 AM, A440A@aol.com wrote: > > <<Gina writes: > > <<"it seems to me that the force of the hammer repeatedly hitting the > string in varying degrees (from pp to fff) could cause the strings to alter > planes.">> > > > Ed wrote: > <<" Greetings all, > IMHO< what it does is alter their phase. The individual strings may > vibrate at exactly the same speed, but the uneven impetus that results from > "unlevel" strings causes one or more of the strings vary in amplitude.">> > > Ed; > in this case you are both correct in that Gina was answering Richards' > question re: what causes a string to get out of level after having been > leveled. Or said another way, she was addressing a string(s) at rest. Your > answer is correct as pertaining to a string(s) in motion. > Have I suceeded in muddying up the subject? :-) > Jim Bryant (FL) Well it is kind of hard to evalute tone when the strings are at rest. : ) On the other hand it is impossible to detect unlevelness when the strings aren't at rest. Although there is one method that claims it does..... Richard Muddenough
This PTG archive page provided courtesy of Moy Piano Service, LLC