Danny, I have used regular contact cement, the "safety" contact cement by Elmers and carpenters wood glue. I personally have had the best results with the wood glue. The most important thing is to roughen the bottom of the plastic sharps with 100 to 120 grit sandpaper first (I have also used my grand hammer tail checking file with good results) and also make sure the key surface itself is sanded flat, clean and dust free. Haven't had any problems with this method. Good Luck, Greg Torres Danny Moore wrote: > List, et. al., > > What would be the glue of choice for gluing plastic sharps? (or > perhaps, plastic flats.) > > Danny Moore > http://www.setexas.com/danmoore/
This PTG archive page provided courtesy of Moy Piano Service, LLC