Hi Alan, Don't print 'em, just cut and paste into your word processor and use it's search function! (or find) At 11:07 PM 6/26/98 +1200, you wrote: >Thanks Keith - bit of a deluge of information all mixed but looks like >this subject has had extensive discussion in the past - I never knew >that this search function was available - great resource. A more >powerful search engine would be needed to filter the exact >data/answers that I need - I'll just have to print out the likely ones >and go from there. Fortunately I have a FAST duplex printer. > >Perhaps there is mention of special tools for removing and installing >? > >I'm going to need some NEW leads (and some lacquer) and PVA glue. > >Thanks again - this "Ehrbar" is a truly wonderful piano at least as >good as Yamaha C.. and other hand made concert series from Feruch >etc. - do you know this brand in USA ? - does the maker still exist ? >I have another one Identical but 1926 in the process of complete >restoration - design & scaling etc. does not seem to have changed. > >>-----Original Message----- >>From: owner-pianotech@ptg.org >>[mailto:owner-pianotech@ptg.org]On Behalf >>Of Keith McGavern >>Sent: Wednesday, July 01, 1998 4:37 PM >>To: pianotech@ptg.org >>Subject: Re: Corroded Balance Weights >> >> >>Use your web browser and enter the web address: >>http://www.webcom.com/wind/ptsearch.html >>Pianotech Mailing List Full-Text Searcher >>July 15, 1994 to June 13, 1998 (6/16/98) >>Enter into search area - key lead >>-- >>Keith A. McGavern >>kam544@ionet.net >>Registered Piano Technician >>Oklahoma Chapter 731 >>Piano Technicians Guild >>USA >> >> >> > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. "Tuner for the Centre of the Arts" drose@dlcwest.com http://www.dlcwest.com/~drose/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC