Hammer spring rail

[Jerry Hunt]

Clyde Hollinger wrote:
> 
> Friends:
> 
> I have two 1980 Everett studio pianos (school model 1155) in which a
> number of the hammer butt springs have broken off at the coil.
> 
> It is my understanding that the quickest, and therefore probably the
> cheapest, way to fix this is to replace the whole rail, springs and
> all.  From whom can I order these?  Any help or advice will be
> appreciated.  Thank you.
> 
> Clyde Hollinger, RPT
> Lititz, PA

Replacing the rail, springs and all, would be the quickest. But
replacing the springs doesn't take very long and is real cheap. I did
one recently following Don Valley's article in the April 96 Journal
(page 42).
-- 
Jerry Hunt
Dallas, TX