squeeky pedal

[A440A]

In a message dated 3/1/98 6:01:07 PM, you wrote:

<< I isolated the problem to the place
where the pedal rod goes through the guide.  It appears to be leather
rather than felt pad in the opening.  What can I do to eliminate this pesky
problem?>>

   If you are describing a pitman arrangement, just replace the pitman with a
smaller diameter dowel, using very short pins on both ends to keep it
centered.  It will be a lot quieter if it is not touching the bushing at all. 
Regards,
Ed Foote