> From: JIMRPT <JIMRPT@aol.com> > Date: Wed, 18 Mar 1998 16:14:14 EST > To: ilvey@a.crl.com, owner-pianotech@ptg.org, pianotech@ptg.org > Cc: q@a.crl.com > Subject: Re: Superglue/ivories > Reply-to: pianotech@ptg.org Jim, I am assuming (oh, oh...) that I would be clamping each ivory while the glue dries? If I don't have to clamp it would be a good idea for this situation. I didn't know the glue could be "reactivated"! Thanks for the tip... > > In a message dated 3/18/98 1:38:01 PM, ilvey@a.crl.com wrote: > > <<I am wondering if anyone has use a thin superglue as a > preventive procedure with ivories where the original glue is > dried out?>> > > David; > Unless there is a time constraint.............why not just use warm water? > It will wick underneath the keytop, reactivate the dried glue wafer, and the > key top will be tight and the same color as those around it. Just an > alternative look. > JIm Bryant (FL) > > ilvey Pacifica, CA ilvey@a.crl.com
This PTG archive page provided courtesy of Moy Piano Service, LLC