At 07:35 AM 2/3/98 -0600, you wrote:
>Thanks Jon, I will try strengthening the hammer springs on a few and see
>what happens, then do the set if it works. It makes sense that it would
>help to hold the hammer toward the backcheck and lessen back and forth
>motion. Thanks.
>Lance Lafargue, RPT
>New Orleans Chapter
>Covington, LA.
>lafargue@iamerica.net
>
Greetings Lance,
Re: your K & B problem. We had several that the butt, buck
skin was rolling in front of the jacks. causing both blubbering, and poor
repetition.
Disconnect the top of the buck skin and reglue with CA glue, the buck skin
must be taut to function correctly.
Hope this helps.
Roger.
This PTG archive page provided courtesy of Moy Piano Service, LLC