Screws pulling through hinge

Keith McGavern kam544@ionet.net
Fri, 27 Mar 1998 10:07:32 -0600 (CST)


>...I got out some #6 oval head screws I had from American, but their heads were
>even smaller.  Does anyone have a solution short of ordering a new hinge?
>
>Bill Maxim, RPT

If the hinge is not damaged, you just need larger oval head screws.  Any
sizable hardware store will have all the various sizes from which to
choose.  APSCO  has these as well.

Keith A. McGavern
kam544@ionet.net
Registered Piano Technician
Oklahoma Chapter 731
Piano Technicians Guild
USA




This PTG archive page provided courtesy of Moy Piano Service, LLC