May I suggest a means to insure evenly lined beckets? I have an info sheet and a jpg of the measuring device. I can't help you on the varnish, I use powdered rosin. Jon Page At 12:26 PM 3/27/98 -0600, you wrote: >I'm getting ready to do my first re-stringing job and am putting in new >pins. As suggested by many on this list, I plan on swabbing the holes >with varnish before inserting the new pins, and would appreciate some >input on what kind of varnish. I looked at my local homecenter >yesterday, and there's all kinds: oil based, water based, poly-whatever, >etc. They did have one kind of "Satin Spar Varnish". The more specific >the better (being the type that agonizes over such things). > >Thanks. >-- >Jerry Hunt >Dallas, TX >Associate member PTG > >
This PTG archive page provided courtesy of Moy Piano Service, LLC