Dell, Why, if you replace the old soundboard don't you put on new strings? Only for not knowing the original scale? I know somebody with an old guy (I hope like this one) and will looking for thestring scale if it's mentionned. I hope the best for you. Greetings, Peter 't MUZIEKINSTRUMENTENATELIER PETER KESTENS BELGIUM KESTENS.P@DEBCOM.BE -----Oorspronkelijk bericht----- Van: Delwin D Fandrich <pianobuilders@olynet.com> Aan: pianotech@ptg.org <pianotech@ptg.org> Datum: donderdag 26 maart 1998 6:08 Onderwerp: Another Broadwood >The List: > >Well, I have another Broadwood question. (No, I don't know why we keep getting these >things...) > >This one is a more-or-less straight strung 7' 9" or 10" grand. We were given a number -- >8454 -- which may be the serial number. (The piano came to us in pieces. We are only >putting in a new soundboard and making new bridges.) The piano has an 85 note scale. There >are 8 mono-chord wrapped unisons, 3 bi-chord wrapped unisons and 8 tri-chord wrapped >unisons. It is extremely slender at the foot. The plate is made basically in two parts, a >hitch pin panel and a tuning pin panel. The struts are separate pieces. It all interlocks >rather cleverly with a minimal number of bolts. > >Now for the problem: The piano was taken apart elsewhere and no record exists of the >original stringing scale. Although we are not going to be stringing the piano I have been >asked to furnish some idea of an appropriate stringing scale. My question is, does anyone >have any idea what the original stringing scale tensions may have been like? > >Thanks, > >Del >
This PTG archive page provided courtesy of Moy Piano Service, LLC