Correctly measuring FAC notes for AccuTuners.

[Jim Coleman, Sr.]

Hi Avery:

Yes, you caught me. I should have said after hitting UP Oct. button to
hit down note button 4 times to get to F5, then play F3.

Jim Coleman, Sr.

On Sat, 23 May 1998, Avery Todd wrote:

> Hi Jim,
> 
>    Thanks for the post. Since I'm still pretty new at this, did you
> overlook saying to also change the note to F? It comes on with an A. Just
> want to be
> sure I'm not misunderstanding anything.
> 
> Avery
> 
> >With SAT turned on, touch TUNE Button. Hit UP Oct button to get to
> >Octave 5. Play F3, hold down MSR button till LED rotation almost stops.
> >Use UP/DN buttons to stop 4 lights momentarily. Hold down SHIFT and touch
> >MSR (RST) button so that right window shows 0.0. Hit UP OCT. button once
> >showing F6 in left window. Pluck string midway between hammer strike-point
> >and Agraffe or V-Bar. Hold down MSR button to almost stop LEDs. Pluck and
> >trim UP/DN buttons to stop LEDs. Hold down SHIFT button and touch
> >STO-STRETCH. button. Machine will change to A5 if everything was done right.
> 
> ___________________________
> Avery Todd, RPT
> Moores School of Music
> University of Houston
> Houston, TX 77204-4893
> 713-743-3226
> atodd@uh.edu
> http://www.music.uh.edu/
> 
> MUSIC DEFINITIONS:
>    Accidentals : the wrong notes. 
> 
> 
>