Wim, I believe you will be getting a "I'm glad I didn't write that" post from Mr. Harvey very soon... David Ilvedson, RPT > From: Wimblees@aol.com > Date: Sun, 14 Feb 1999 23:28:04 EST > To: pianotech@ptg.org > Subject: Re: warped nameboard strip > Reply-to: pianotech@ptg.org > In a message dated 2/15/99 1:55:17 AM !!!First Boot!!!, jkazanjian@hotmail.com > writes: > > << Recently I serviced a Chickering console where the nameboard strip > was bowed in the center and the sharps were knocking on it. It was only > anchored to the cheek blocks,with no anchor in the middle of the > keyboard. I tried moving the postion of the screws in the cheek blocks, > but I don't have to much room to play.The sharps still knock in the > middle of the keyboard.I'm at a loss on how to fix this problem. Any > ideas.? Thanks > Judy Kazanjian >> > > > File down the sharps. > > Willem Blees > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC