List: I tuned a grand piano the other day with a serial number, but no name showing. I found a brass brace, looks original, screwed into the side of the piano case, extending to the center of the longest plate strut. Into the top of the strut was a tapped hole, with a machine screw that attached the brass brace to the strut. Incredibly dumb place to drill into a strut. Anyone ever seen anything like this? The struts extended across the pinblock area, and were very thin and high, even 2 1/2" above the plate in the pin sections. The customer would like to know the manufacturer of the piano, if possible. I thought the brace itself might have been strange enough to identify the piano. Any help would be appreciated. Bill Simon Phoenix
This PTG archive page provided courtesy of Moy Piano Service, LLC