Yamaha electric grand

[Newton Hunt]

3) Raise sharps 1 mm, and corresponding dip,
to make hand work a little harder, creating

This is not to good idea unless the sharps are 1mm low.  Sharp height
should be 10mm above the natural.  Increasing height can be detected and
uncomfortable for high level player.

Check the capstan location on the wippen heel.  It occurs to me that the
capstans are too far back.  If this is the case no amount of lead will
change the action leverage.

Look for David Standwood's posts on the new metrology in the archives.

                            Newton