Plastic keytop removal

[Jon Page]

I would worry about the steam affecting the bushings.

An iron at the proper setting with aluminium foil makes the key tops
pliable and peel right off. A set can be removed in less than a half hour.

Drat, the snow has turned to rain. Now the 2" snowfall will be gone
by tomorrow. You guys in the mid west have all the luck.    :-)

Jon Page
Harwich Port, Cape Cod, Mass. (jpage@capecod.net)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
At 06:09 PM 1/14/99 -0500, you wrote:
>Lance--I use a flat roast pan with a grid on top.  Put water in the roast pan
>and the keys upside down on top of the grid.  Put the pan on the stove and
>steam the keys.  Takes about 5-10 minutes per key but you can do 10-15 at a
>time.
>
>Good Luck
>
>Dick Day
>A-- deep in snow in Michigan
>