>Dear List >The following is a mere observation and does not reflect the working >practices of the contributor !!! >A few months ago now I met a tech. who told me that he frequently used a >low pressure spray gun to clean the dust {etc} out of those difficult to >reach places of piano actions . He went on to say that he used silicon >beads {?} which ,although, carcinogenic {!}, were able to be re-cycled. >The action was removed and placed in a typical spray booth. He promised me >that the spraying wouldn't affect the bushings etc . This is hard to >believe . This method he said would remove the ingrained dirt. >He also said something to the effect of " Once upon a time he had SAND >BLASTED an action " >I have asked a few technicians {Inc supply houses} here in the UK but no >one is willing to enlighten me . > >High Pressure air blasting I know about. This is something different. >If someone could let me know what he was talking about . >Q Does anyone spray their actions clean ? >Q If silicon beads is a no-go , what if anything , is the alternative ? >Q Is the rest of the world silicon spraying their actions , except me ? > >Many Thanks in anticipation > >Alan King >Piano Tech (Scotland, UK) >MPTA >adkpiano@breathemail.net Dear Alan: To familiarize yourself with this process, I suggest reading Bill Spurlock's series of articles in the January to March 1992 issues of the Piano Technicians Journal. We equipped our rebuilding shop likewise a few years ago and we have not regretted doing so. The quality of our work and the efficiency of our methods have increased tremendously. You can also purchase the reprint book titled, General Repair: Reconditioning of Parts, Tools and Felt Work, which includes the articles on Glass Bead Blasting and is available from the PTG home office. Best Regards, Stan Kroeker Registered Piano Technician Kroeker & Sons Piano Experts 59 Quiring Winnipeg, Manitoba Canada R2G 1Y5 Ph. 204-669-5881
This PTG archive page provided courtesy of Moy Piano Service, LLC