>X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 > >Hi folks, thanks to those who responded to my query about refinishing. I >have been rebuilding a 1912 Haines Bros grand for experience as most of the >piano tech work that I do is tuning and minor repairs. The last complete >rebuild I did was in College 13 years ago. I will probably keep it to teach >on and move my teaching piano ( Heintzman upright which I love) out of my >studio and upstairs so that my kids can start a relationship with the piano. >They are 2 and 4 and if left unattended will trash the studio. My wife is >telling me that I really should be teaching on a grand as it will impress >students and parents. As I cannot afford a decent grand I am trying to >improve the Haines. I have repaired 2 major cracks and refinished the >soundboard, painted the plate, installed new strings and tuning pins, >rebushed the keys and put on new keytops, various new felts, repinned hammer >flanges, new knuckles, filed and shaped the old hammers and regulated. I am >now trying to decide whether to voice the hammers and keep them or put on >new ones which I know really is the best route to go. As my voicing >experience is limited I'm not sure if what I presently hear is fixable by >voicing or can only be cured with new hammers or some other problem. The >bass and tenor section is a bit nasal, the lower treble sound ok, mid treble >is a bit tinny,and the high treble has a strong knock. What thinks ye? >John Pengelly >The Tuning Fork >Nelson B.C. > >
This PTG archive page provided courtesy of Moy Piano Service, LLC