Thanks for checking. I'll try to find Tim Conrad.. Ed At 05:04 PM 1/24/99 +0000, you wrote: >In article <36AB39E4.A2C6536A@jagat.com>, Newton Hunt <nhunt@jagat.com> >writes >> >>Make certain the wippen and especially the hammer flange pinning is proper >>and the spring seats are lubricated with Protek. >> >>Regulate the action: blow distance, capstans, level, dip, let-off, >>backchecks, bridle wires and damper spoons. >> >>Touch weight is measured with dampers off the spoons throughout, grands and >>upright. > > >One thing extra I would do to what has been already said. Lay the >action down on some old news paper, lift up the damper lift rod, so >that the dampers are off the spoons and pro-teck the spoons, on some >actions I will take of the damper slap rail so I can get at the damper >tail felt as well. Of course this is more easier in the UK as most >actions have the but spring on the but and not on the Damper slap rail. > >Barrie, > > > > > > > >-- > >Barrie Heaton | Be Environmentally Friendly >URL: http://www.uk-piano.org/ | To Your Neighbour >The UK Piano Page | >pgp key on request | HAVE YOUR PIANO TUNED > >
This PTG archive page provided courtesy of Moy Piano Service, LLC