Dear List: I have a problem with some Baldwin large upright pianos that are new. The type of action brackets Baldwin uses are secured with bolts into the plate. When I remove the screws to service the action, I can't get the screws back into their holes. The action bracket hole is about 1/8" too high. Should I lower the support studs (they are adjustable up and down) or will I make more problems for myself? I tried lowering the studs, and now all the capstans need readjustment. Is there a better way to get those screws back in? I'll be returning to the piano Monday afternoon. Thanks for any input. Paul McCloud San Diego
This PTG archive page provided courtesy of Moy Piano Service, LLC