Baldwin Action Problem

[Joe & Penny Goss]

Hi Paul,
Your last post gives me a better idea of an approach to solving the
replacement of the action.
You state that the left side of the action is able to have the bolts
replaced without too much difficulties.
Replace these bolts but do not tighten all the way. Next take a combination
tool that fits your handle and place it in the far right hole and pry down.
If this allows you to start the screw in the hole of the left center,
tighten it so that it will hold the action for the last bolt.
If this does not help, look for pry points above the action bracket part.
Joe