The heat's getting to you Dale, Sheesh, one silly little millimeter! OK then 3mm and if it is 2mm then that too is ok. Go look at a Yamaha sometime. Newton dale r fox wrote: > > So not to be picky, but 2mm is a great deal less than 1/8" so....... > > Just had to , sorry. > > Dale > > On Sun, 25 Jul 1999 14:16:15 -0400 nhunt@jagat.com (Newton Hunt) writes: > >> > >> Of note, on the back of the Feb 88 Journal in a Yamaha advert they > >say > >> they drill at 5 degrees. > >> > >> Brian > > > >But 5 degrees to what? > > > >One item I left out is that I like to have my bottom coil no greater > >than 1/8" or 2mm from the plate. > > > > Newton > > ___________________________________________________________________ > Get the Internet just the way you want it. > Free software, free e-mail, and free Internet access for a month! > Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
This PTG archive page provided courtesy of Moy Piano Service, LLC