Hi Roger, I have been studying the hammer tail device you gave me to develop. As I look at it it seems to me that a slight change would enable one to make the two mirror images into one gig on the same base. I am thinking that if one changed the angle adjustment screw that is on the side to a slotted slider that moved in a slot in the front of the tool, the mirror image could be back to back on the same base with two holddowns and two slider adjustments on the opposite sides of the tool that hold the hammer. Please let me know what you think about this idea. You can call me at 1 800 343 5257 if you wish to talk directly to me or by email. Joe Goss
This PTG archive page provided courtesy of Moy Piano Service, LLC