Don, CA to the rescue!!!! Remove the part and remove screw and plate. Then size the screw hole with thin CA glue and re assemble. I hope that they are not all that loose O:( Joe Goss ---------- > From: Don <drose@dlcwest.com> > To: pianotech@ptg.org > Subject: screw loose? > Date: Tuesday, June 08, 1999 7:58 AM > > Hi all, > > The piano a Young Chang U-116 about 8 years old with french butts > > The symptom the screw that holds the butt plate tight--doesn't!! > > Any suggestions gratefully accepted! > > > Regards, > Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > > Tuner for the Saskatchewan Centre of the Arts > > drose@dlcwest.com > http://www.dlcwest.com/~drose/ > 3004 Grant Rd. > REGINA, SK > S4S 5G7 > 306-352-3620 or 1-888-29t-uner >
This PTG archive page provided courtesy of Moy Piano Service, LLC