At 07:41 AM 6/24/99 -0400, Clyde wrote: >If the block is solid, is the problem with the torque caused by uneven >hole size or by differing pin diameters? Are the tuning pins ever the >culprits in situations like this? You mean like some of the Hastings with no threads at all on the pins? John Musselwhite, RPT - Calgary, Alberta Canada Registered Piano Technician http://www.musselwhite.com email: john@musselwhite.com - blues@musselwhite.com
This PTG archive page provided courtesy of Moy Piano Service, LLC