>I tuned a Kimball console yesterday........ from the late 70's-early 80's. > Every thing worked just fine......except for the 'soft pedal' and the 'bass >sustain'. > > Both pedals worked, after a fashion, and on the down stroke they seemed >just fine.............however they were very slow in coming to rest upon >release....and the hammer rail would stay in about the mid travel position. > >What was wrong? (hint: piano had recently been moved) >Jim Bryant (FL) Hi Jim, Were the trap levers rubbing against each other, having slipped out of their normal position during the move? Tom Tom Seay School of Music The University of Texas at Austin mailto:t.seay@mail.utexas.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC