JIMRPT@AOL.COM wrote: > > I tuned a Kimball console yesterday........ from the late 70's-early 80's. > Every thing worked just fine......except for the 'soft pedal' and the 'bass > sustain'. > > Both pedals worked, after a fashion, and on the down stroke they seemed > just fine.............however they were very slow in coming to rest upon > release....and the hammer rail would stay in about the mid travel position. > > What was wrong? (hint: piano had recently been moved) > Jim Bryant (FL) If it were a Wurlitzer, I would check to see if the side of the piano were unglued from the posts. Maybe Kimball had a few bad glue joints too? Bill Kidd
This PTG archive page provided courtesy of Moy Piano Service, LLC