My guess for another advantage of the single string format is that the wire is straight or can be straightened. This would mean (in theory) the strings would not need to be leveled. Or if they did need leveling the problem is not from the curve of the wire. Also it might be that actual stringing is faster, and it chips and tunes up quicker. And the tail segment can be positioned exactly according to the zig it goes through the bridge pins. Problems I can imagine are that the extra holes for single hitch pins might weaken the plate. They would have to be staggered more and the disparity of tail lengths might create tonal problems, execpt there is always some kind of rear duplex, even if it is not designed as a duplex. Which would make it a nomenclature problem. R Moody ---------- From: Sy Zabrocki <only4zab@imt.net> To: Pianotech <pianotech@ptg.org> Subject: Single String Format Date: Thursday, February 25, 1999 11:46 PM List: from Sy Zabrocki Beckstein, Bosendorfer, Grotrian and August Forester still use the single string format. Meaning each string has it's own hitch pin and loop.
This PTG archive page provided courtesy of Moy Piano Service, LLC