AcryliKey...anybody using it?

DGPEAKE@AOL.COM DGPEAKE@AOL.COM
Sun, 21 Mar 1999 18:13:55 EST


In a message dated 3/21/99 10:52:42 AM Pacific Standard Time,
BobDavis88@AOL.COM writes:

<< 
 We have had some pop out, even with good preparation. It is hard to get a
good
 mechanical grip on such a small area. Next time I'm going to drill a small
 hole into the key to provide a little "foot" for the repair.
 
 Bob Davis
 
 
 -- >>
You can use masking tape to provide a "well" for the solution.  After it
hardens you can remove the tape and trim.

Dave Peake, RPT
Oregon City, OR
Portland Chapter


This PTG archive page provided courtesy of Moy Piano Service, LLC