Del, Does this mean when you rebuild you replace angled hitch pins with the vertical pin? You do this as a general practice? David I. Date sent: Tue, 30 Mar 1999 21:12:22 -0800 From: Delwin D Fandrich <pianobuilders@olynet.com> Organization: PianoBuilders/NW To: pianotech@ptg.org Subject: Re: Leveling a plate? Del? Ron? Anybody? Send reply to: pianotech@ptg.org > > > JIMRPT@AOL.COM wrote: > > > .... (short unsolicited plug for Baldwin----this is an advantage of the accujust > > > > system, not having to be verrrry careful with bridge/plate height, and setting > > bearing after stringing, the system works very well within its design > > limits.).... > > --------------------------------------- > > That is indeed one advantage. The most important one, of course, is that the > vertical hitch -- of whatever specific design -- is simply that it provides a > better string termination acoustically. I'd use them for this reason alone. > > Del > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC