Water thin epoxy

[Frank Weston]

You can thin West System 206 Epoxy with the heat from a hot air gun until it
will flow like water.  Experiment first, because there is a fine line
between heating to reduce viscosity and heating to accelerate the cure.
Wear a respirator while doing this experiment.  Relatively odorless fumes
are released that can cause a severe allergic reaction.

Frank Weston

-----Original Message-----
From: BSimon1234@AOL.COM <BSimon1234@AOL.COM>
To: pianotech@ptg.org <pianotech@ptg.org>
Date: Friday, May 14, 1999 2:34 AM
Subject: Water thin epoxy


>Dear List:
>
>I am looking for a source of very thin epoxy with which to do some
>experiments in treating loose tuning pins. If you know of any sources
please
>e-mail me, on the list or privately.
>
>A while back I seem to remember that a list member recommended a particular
>epoxy for that use, but I cannot find the reference.
>
>Thank you,
>
>Bill Simon
>Phoenix
>