Hi Don, Sounds as if the bridge pin has a nick in it, or the notch is not in the correct position WRT to the bridge pin. Do the two strings sound differently? This can be a clue to termination differences. Measure each of the strings with your RCT in PAZ mode. Regards Roger At 02:32 PM 5/17/99 -0600, you wrote: >Hi Folks, > >I am having a problem with a 1.5 year old C3. On two occasions string #39 >(A2 bass side) has broken. Both times at the bridge (sounding length side). >Has anyone had similar problems? > >And, yes, it is in a church. I have suggested using a microphone and sound >system with the instrument and providing the pianist with a monitor, and >have deliberately reduced hammer blow on this note. >Regards, >Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > >Tuner for the Saskatchewan Centre of the Arts > >drose@dlcwest.com >http://www.dlcwest.com/~drose/ >3004 Grant Rd. >REGINA, SK >S4S 5G7 >306-352-3620 or 1-888-29t-uner > > Roger Jolly Balwin Yamaha Piano Centres. Saskatoon/Regina. Canada.
This PTG archive page provided courtesy of Moy Piano Service, LLC