That is what I would do. Try tapping the pin and see if the bridge cap will give at all and straighten up the alignment. Personally I sometimes find myself "wallering" around the shop. David Ilvedson, RPT Date sent: Tue, 25 May 1999 14:59:52 -0400 From: nhunt@jagat.com (Newton Hunt) To: pianotech@ptg.org Subject: Re: Bridge pin problem. Wurlitzer C173 Send reply to: pianotech@ptg.org > I would waller (excellent technical word) out the hole until the pin > (reincerted) leaned enough to the left to match it's neighbors and > then use thin CA to secur it into place. Quick, easy and VERY > permenant. > > Newton > > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC