At 07:25 AM 11/09/1999 -0500, you wrote: >At 08:00 PM 11/08/1999 -0500, you wrote: > >>recommended, so that is what I am doing, but this is about as temporary as >>our using powder on knuckles (which gives a few months' quietness at best). > >I mix the powder into Protek and brush it on. The Protek being the vehicle >carries the powder into the cloth, also lubricating by itself. Sort of like: >"If the right don't gitcha, the left one will". I forgot to mention burnishing after the mix has dried with a cork covered wooden slat. Gasket material glued to thin slats (Renner USA s/f shipping spacers). I've also mixed Protek, 444 & Teflon; to cover all bases. It slipped my mind, Jon Page, Harwich Port, Cape Cod, Mass. mailto:jpage@capecod.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC